A visible water inlet
There should be a hose running into the side or base of the cistern, with a shut-off valve you can turn by hand. If the plumbing disappears into the wall with nothing accessible, this setup will not work.
Zevlor™ Bidet Attachment — Fresh, Clean & Paper-Free in Seconds
Zevlor™ Bidet Attachment — Fresh, Clean & Paper-Free in Seconds
The average US household spends $180+ a year on toilet paper. Purl pays for itself in months — then keeps saving.
- Dual self-cleaning nozzles — separate front & rear wash
- Adjustable water pressure — gentle to powerful, your control
- No electricity, no batteries — runs on your existing water line
- Fits standard toilets — installs in about 10 minutes, no plumber
- Cleaner than paper · gentle on skin · far less TP
BUNDLE & SAVE
Couldn't load pickup availability
Zevlor™ Bidet Attachment — Fresh, Clean & Paper-Free in Seconds
Regular price
A$119.95
Regular price
A$119.95
Sale price
A$79.90
Unit price
per
Non-Electric Bidet Attachment
The bidet that fits the toilet you already have
No power point. No plumber. No permanent changes to a bathroom you might not own. Zevlor™ sits under your existing seat and runs off the water line that already fills your cistern.
No electricity required
Fits standard Australian toilets
About 10 minutes to fit
Free shipping Australia-wide
60-night money-back guarantee
What the alternatives actually cost
The seat was never the expensive part
Heated Japanese-style bidet seats are lovely. They also need mains power beside the toilet, which most Australian bathrooms do not have. That turns a purchase into a project.
Feature
Heated electric seat
Zevlor™
Typical unit price
Heated electric seat
A$400 to A$600
Zevlor™
A$119.95
Power point needed
Heated electric seat
Yes, a new circuit in a wet area
Zevlor™
No
Licensed electrician
Heated electric seat
Yes, plus wet-area compliance
Zevlor™
No
Permanent changes
Heated electric seat
Wiring, often through a tiled wall
Zevlor™
None, it lifts off
Landlord approval
Heated electric seat
Usually required
Zevlor™
Nothing is altered
Fitting time
Heated electric seat
Trade booking
Zevlor™
About 10 minutes
Warm water and dryer
Heated electric seat
Yes
Zevlor™
No, mains-temperature water
Electric seat prices are indicative of the Australian retail range and exclude electrical work. If warm water and air drying are what you want, a powered seat is the right product. Get an electrician's quote before buying one.
Fits the toilet you already have
No power point. No plumber. No landlord conversation.
From A$119 each when you take two or more.
Free tracked shipping Australia-wide 60 nights to change your mind
Check before you order
Thirty seconds behind your toilet
This is the one thing worth checking first. Look at the back of your toilet. If these three things are true, Zevlor™ should fit.
A seat that lifts off
Two bolts hold your seat in place. Zevlor™ sits between the toilet pan and the seat, so the seat must come off and go back on. Standard two-piece toilets and most one-piece toilets are suitable.
Room at the back
You need a few centimetres between the toilet pan and the cistern so the mounting plate can sit flat. Very compact or wall-hung designs may not leave enough room.
Not sure? Send us a clear photo of the back of your toilet before ordering and we will tell you honestly whether it looks compatible.
Everything in the box
Everything needed to fit it
Nothing to buy separately, no trip to Bunnings halfway through.
Bidet attachment
Dual nozzle and adjustable pressure dial
T-valve
Splits your existing cistern water feed
Braided hose
Connects the T-valve to the attachment
Fittings & washers
Spare seals and connection fittings included
Seat spacers
Help create a flush and level seat fit
Installation guide
Illustrated instructions written in plain English
Easier than you think
Installs in About 10 Minutes
No plumber. No special tools. If you can change a shower head, you can do this.
Step 1
Turn Off & Lift
Shut the water valve behind your toilet and lift your existing seat.
Step 2
Attach Zevlor™
Slide the bidet beneath the seat and connect the included hose to your water line.
Step 3
Turn On & Go
Restore the water, turn the dial and enjoy your first fresh rinse.
Simple by design
Four things, no electronics
Dual nozzles
Separate rear and frontal wash, selected directly on the dial.
Self-cleaning
The nozzles sit behind a guard and rinse themselves before and after each use, so nothing is left exposed in the bowl.
Pressure control
One dial, from a very light rinse upward. Most people settle well below halfway.
No power
Runs entirely on household water pressure. Nothing to plug in, charge or replace.
What to know before ordering
The honest bit
The water is not heated
It runs at mains temperature because there is no heating element and no electricity. In a Queensland summer, that is usually no issue. On a July morning in Ballarat, you will notice it. Most people adjust within a week, and starting with a low pressure setting helps.
If warm water and air drying are what you want, choose a powered seat instead. Get an electrician's quote before ordering one.
Who this is not for
- Your cistern connection is concealed inside the wall with no accessible shut-off valve.
- You have a wall-hung or very compact toilet with no room behind the seat.
- You want a complete replacement seat rather than an attachment.
- You expect it to eliminate toilet paper entirely. You will still use a small amount for drying.
The Details
Specifications
| Type | Non-electric under-seat bidet attachment |
|---|---|
| Nozzles | Dual self-cleaning nozzles for front and rear wash |
| Water Pressure | Adjustable pressure control dial |
| Power | No electricity required — connects to your existing water line |
| Fits | Most standard two-piece toilets; installation kit included |
| In the Box | Bidet attachment · T-valve and hoses · Fittings · Installation guide |
| Installation | Approximately 10 minutes with no plumber required |
| Shipping | FREE tracked shipping across the US |
The first rinse converts you
What Customers Are Saying
Reviews from our early customers.
★★★★★
“Installed it in a weekend before my morning coffee. Genuinely can’t imagine going back to just paper. Wish I’d done this years ago.”
Marcus R. — Austin, TX
★★★★★
“We stopped buying the giant toilet paper packs. Between two bathrooms, it basically paid for itself by spring. The pressure control is perfect.”
Danielle K. — Denver, CO
★★★★☆
“I was nervous about installing it, but it really was about ten minutes. It feels so much cleaner that I bought a second one for the guest bathroom.”
Priya S. — Columbus, OH
60
Day
Guarantee
Love it for 60 days, or your money back
Try Zevlor™ for 60 Nights We're that confident the first rinse will convince you. If it doesn't, send it back within 60 nights for a full refund — no awkward questions.
Questions, answered
Everything you'd want to know
Do I need a plumber?
Do I need a plumber?
No. It connects to the water line that already feeds your cistern, using the fittings in the box. Buyers typically describe it as a ten-minute job with an adjustable spanner. If the connection behind your toilet is damaged, unusual, or doesn't match the supplied parts, stop and call a licensed plumber.
Will it fit my toilet?
Will it fit my toilet?
It's designed for standard two-piece and most one-piece Australian toilets. Run the three checks above before ordering a visible cistern inlet with a shut-off valve, a seat that unbolts, and a few centimetres of room behind the seat. Send us a photo if you're unsure
Is the water cold?
Is the water cold?
This model uses room-temperature water from your supply line. Most customers find it refreshing and get used to it within a day or two. (A warm-water model is on our roadmap.)
Is it hygienic?
Is it hygienic?
The nozzles retract behind a guard when not in use and rinse themselves before and after each wash, so the part that does the work isn't sitting exposed in the bowl between uses.
Will I stop buying toilet paper?
Will I stop buying toilet paper?
No, and be sceptical of anyone who says you will. you'll still use some to dry. What most households report is a pack lasting considerably longer, and no longer buying wipes at all.
Can I take it with me when I move?
Can I take it with me when I move?
Yes. Nothing is drilled, cut or permanently altered. It comes off in a few minutes and your original seat goes straight back on. Check the next toilet against the three points above before refitting.
How long does delivery take?
How long does delivery take?
Dispatched within 24–48 hours with free tracked shipping Australia-wide.